diff --git a/factorimods b/factorimods
new file mode 100644
index 0000000..378dd12
--- /dev/null
+++ b/factorimods
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+#Dependencies : you'll need a dmenu-like to run this script.
+#On debian and debian-like distros (ubuntu, mint...), simply run:
+# sudo apt install dmenu
+
+#Edit this line to meet your installation
+factorio_dir="/DATA/Games/factorio"
+
+cd $factorio_dir/saves
+
+#Ask the user to select a save
+save=$(ls -t *.zip | grep -v autosave | rev | cut -d "." -f 2- | rev | dmenu)
+
+test $? -ne 0 && echo "No save selected" && exit 1
+
+#Check if a modlist exists for that save
+if test -s mod-list.json_$save ; then
+	modlist=$save
+else
+	#Otherwise, prompt to load another modlist
+	modlist=$(ls -t mod-list.json_* | cut -d "_" -f 2- | dmenu -p "No mod list found for savegame $save. Select mod list from available: ")
+	
+	test $? -ne 0 && echo "No modlist selected" && exit 1
+	
+	#And prompt to save it for later
+	echo -e "yes\nno" | dmenu -p "Save selected modlist for savegame $save ?" | grep "yes" && cp mod-list.json_$modlist mod-list.json_$save && modlist=$save
+fi
+
+#Link that modlist to the file read by factorio
+ln -fs ../saves/mod-list.json_$modlist ../mods/mod-list.json
+
+
+#Launch the game and the requested save
+cd ..
+echo "$factorio_dir/bin/x64/factorio --load-game $factorio_dir/saves/$save.zip"
+$factorio_dir/bin/x64/factorio --load-game $factorio_dir/saves/$save.zip
diff --git a/unduplicator.sh b/unduplicator.sh
new file mode 100644
index 0000000..48e2ec8
--- /dev/null
+++ b/unduplicator.sh
@@ -0,0 +1,42 @@
+#/bin/bash
+usage="\
+$0 [-o OUTFILE] FILE1 [FILE2] [FILE3]...
+Concatenate, sort and remove duplicate lines from a list of files.
+If outfile isn't provided, will output to ./unduplicated.
+"
+
+test $# -eq 0 && echo -e "$usage\n\nError: At least one argument is needed" && exit 1
+
+if test $1 = "-o" ; then
+	outfile="$2"
+	shift 2
+else
+	outfile="./unduplicated"
+fi
+
+test $# -eq 0 && echo -e "$usage\n\nError: At least one file is required" && exit 1
+
+file="$@"
+#echo $file
+
+input=`mktemp`
+output=`mktemp`
+#echo -e "Unduplicator:\n\tinfiles: $file\n\tinput:\t$input\n\toutput: $output\n\t	outfile: $outfile"
+
+
+sort "$file" > "$input"
+
+#ls -lh $input $output
+#i=0
+
+while read -r line ; do
+	#i=$((i+1))
+#	echo "$i: $line ($file)"
+	test "$line" != "$linee" &&	echo "$line" >> $output # || echo "duplicate found : $line"
+	linee="$line"
+
+done < "$input"
+
+cat $output > $outfile
+rm $input $output
+exit 0
diff --git a/volume.sh b/volume.sh
new file mode 100644
index 0000000..0ce5525
--- /dev/null
+++ b/volume.sh
@@ -0,0 +1,61 @@
+#/bin/bash
+usage="\
+$0 on|off|toggle|set|up|down [VALUE]
+Simple binder between amixer, hotkeys and herbe notifications
+"
+
+test $# -eq 0 -o $# -gt 2 && echo -e "$usage\nOne or two arguments expected" && exit 1 ;
+
+
+case $1 in
+	"up")
+		vol="$(amixer set Master ${2:-3}%+	| tail -n 1 | cut -d ' ' -f 7 | tr -d '[]%')" ;;
+	"down")
+		vol="$(amixer set Master ${2:-3}%-	| tail -n 1 | cut -d ' ' -f 7 | tr -d '[]%')" ;;
+	"on")
+		vol="$(amixer set Master on			| tail -n 1 | cut -d ' ' -f 7 | tr -d '[]%')" ;;
+	"off")
+		vol="$(amixer set Master off		| tail -n 1 | cut -d ' ' -f 7 | tr -d '[]%')" ;;
+	"toggle")
+		vol="$(amixer set Master toggle		| tail -n 1 | cut -d ' ' -f 7 | tr -d '[]%')" ;;
+	"set")
+		vol=$2
+		amixer -q set Master "$vol%" > /dev/null ;;
+	*)
+		echo "$usage"
+		echo "Unrecognized argument: $1"
+		exit 1 ;;
+esac
+
+ls /tmp/dsblok.pid &> /dev/null && /home/karsaell/Downloads/dsblocks/sigdsblocks/sigdsblocks 1 $vol
+
+#echo vol: $vol
+
+for i in {1..100..3} ; do
+	if test $i -lt $vol ; then
+		herbe="$herbe|"
+	else
+		herbe="$herbe "
+	fi
+done
+
+test -s /tmp/herbe_volume_pid && ( kill -s SIGUSR1 $(cat /tmp/herbe_volume_pid) ; rm /tmp/herbe_volume_pid )
+
+amixer get Master | grep -q "%] \[on\]" && state=on || state=off
+
+case $state in
+	on)
+		herbe.norm " $herbe" &
+		pid=$!
+		echo $pid >> /tmp/herbe_volume_pid
+		;;
+	off)
+		herbe.low " $herbe" &
+		pid=$!
+		echo $pid >> /tmp/herbe_volume_pid
+		;;
+esac
+
+wait $pid
+
+test -e /tmp/herbe_volume_pid && echo -n `cat /tmp/herbe_volume_pid | grep -v $pid` > /tmp/herbe_volume_pid
diff --git a/wico b/wico
new file mode 100644
index 0000000..adc227f
--- /dev/null
+++ b/wico
@@ -0,0 +1,36 @@
+#!/bin/sh
+#wico.sh : choose a wifi signal in range and try to connect to it
+
+verb=0
+
+if ( nmcli radio wifi | grep disabled > /dev/null ) ; then
+ 	test $verb -gt 0 && echo "Turning wifi on"
+ 	nmcli radio wifi on 
+ 	sleep 1
+fi
+
+test $verb -gt 0 && echo "Scanning networks in range..."
+nmcli device wifi rescan
+
+ssid=$(nmcli -f IN-USE,SSID,BARS d wifi list | dmenu -l 8 | tr -s '*' ' ' | rev | cut -d ' ' -f 3- | rev | cut -d ' ' -f 2-)
+
+test $verb -gt 0 && echo ssid: $ssid
+
+test -z "$ssid" && echo "No ssid selected" && exit 1
+
+if (nmcli d wifi connect "$ssid" | grep Error ) ; then
+	
+	test $verb -gt 0 && echo "Password required"
+	
+	herbe "Wifi "$ssid" : Password required" &
+	
+	psk=$(echo Wifi: "$ssid" | dmenu -p "Please (re)type password")
+	
+	test $verb -gt 0 && echo $psk
+	
+	nmcli d wifi connect "$ssid" password "$psk"
+fi
+
+herbe "$(nmcli | grep wlp2s0:)"
+
+exit $?
diff --git a/xpause b/xpause
new file mode 100644
index 0000000..0cfae83
--- /dev/null
+++ b/xpause
@@ -0,0 +1,42 @@
+#!/bin/bash
+
+#Usage
+#	xpause [resume]
+# Click on a window to pause its process, or resume all such paused processes
+
+#return status:
+#	0 - Ok
+#	1 - kill failed
+#	2 - no pid found to resume
+#	3 - failed to get pid from window
+
+if test "$1" = "resume" ; then
+	if test -s /tmp/xpause ; then
+		kill -SIGCONT $(cat /tmp/xpause) || ( echo "xpause FAILED (kill)" ; exit 1 )
+		echo "xunpaused $(cat /tmp/xpause | wc -l)"
+		rm /tmp/xpause
+		exit 0
+	fi
+	echo "xpause FAILED" "No process to resume"
+	exit 2
+fi
+
+pid=$(xprop | grep PID | cut -d "=" -f 2)
+test "$pid" -gt 0 || ( echo "xpause failed to get pid from window" ; exit 3 )
+
+if test -s /tmp/xpause ; then
+	if grep "$pid" /tmp/xpause ; then
+		if kill -SIGCONT "$pid" ; then
+			echo "unpaused $pid" 
+			exit 0 
+		else
+			echo "xpause FAILED (kill)"
+			exit 1
+		 fi
+	fi
+fi
+
+echo $pid >> /tmp/xpause
+kill -s "SIGSTOP" $pid || ( echo "xpause FAILED (kill)" ; exit 1 )
+echo "xpaused $pid"
+exit 0